适用标准Applicable standards GB/T 17626.5,IEC/EN 61000-4-5 (1)行业对象Industry objects 电源行业,防雷元件厂家 Power industry, manufacturers of lightning protection components (2)产品特点Product Features l 电脑+PLC控制,软件操作自动控制完成测试 Compute+ Plc Control, Complete the test automation software operation l 电脑软件读取示波器波形,并计算出波形参数 Computer software reads the oscilloscope waveform and waveform parameters calculated l 软件保存测试产品的波形参数,直接输出打印报表 Waveform parameters of the software to save the test product, direct output printing a report l 程控高压电源,电压稳定精度准备,击穿电流电压示波器及软件 Programmable high voltage power supply, voltage stability and accuracy preparation, breakdown voltage current software oscilloscope and simultaneously display l 同时显示Displayed simultaneously l 采用进口无感大功率电阻,确保浪涌波形一致性 Imported without a sense of power resistors to ensure consistency of the surge waveform l 电压极性自动切换正、负极性自动切换 Automatic switching voltage polarity positive, negative automatic switching l 浪涌注入相位角度0-360°自由设定(30°步进) synchronous in a range between 0-360 versus the AC line phase angle(30 stepper) l 内置电,流/电压探头, 示波器及软件可同时观测波形 Built-in current/voltage probes, Oscilloscopes and waveform software can be observed simultaneously l RJ45网络接口,RS-232通信选配串口, 实现远程控制 RJ45 Network Interface,RS-232 communication interface, can be implemented remote control (3)性能参数Performance Parameters 开路电压波形:1.2/50μS(1.2μS±30%、50μS±20%) open circuit voltage waveform: 1.2/50μS(1.2μS±30%、50μS±20%) 短路电流波形:8/20μS (8μS±20%、20μS±20% ) short circuit voltage waveform: 8/20μS (8μS±20%、20μS±20% ) 设备充电电压调节采用无级调压模式,该设备的充电电压为500V-20KV持续可调短路电流波形 The equipment adopts stepless voltage charging voltage regulation mode, the charge voltage of the device is 500V-20KV adjustable short-circuit current waveform duration 输出开路电压:500V -20KV(±10%) output voltage:500-20kv(±10%) 输出短路电流:250A-10KA output short circuit current t: 250A-10KA 电压极性:正/负 Voltage polarity: positive/ negative 输出阻抗: 2Ω(±0.2Ω) Output impedance: 2Ω(±0.2Ω) 间隔时间:10-999S Interval time:10-999S 触发方式: 相位角0°~360° Trigger-mode: Phase angle0°~360° |